|
|
Post by comanmereel on Nov 24, 2009 1:27:03 GMT -5
 Name: Coman Mereel Species: Human Height: 2 meters Weight: 110 kg Hair color/length/style: Blonde/greying keeped cut close to the scalp Gender: m Identifying Marks: 2 inch scar under left eye Homeworld: Mandalore (Originally Corellia) Typical Clothing: Beskar'gam/loose fitting casual Weapon of Choice: beskad/dual phase shoto lightsaber (red/orange blade) Personality: aggressive and brutal Strengths: expert in hand to hand combat, loyal, and protective Weaknesses: anger and mild paranoia History: Mereel was born and lived on Corellia untill age 10 when his mother was killed and he was put into slavery where he was taught to fight in the pits of Corellia... until freed by a Mandalorian Clone bounty hunter calling himself Mereel Skirata, who finished his upbringing teaching him about the Mandalorian lifestyle... teaching him and adopting him... |
|
|
|
Post by comanmereel on Nov 24, 2009 1:29:27 GMT -5
This ceremonial armor is polished and light weight... it consists of simply a chest plate and back plate with shoulder protection that are painted red... a thigh plate on each leg and shin protection... other than the shoulder protection and gaunlets which are painted gold, Mereel has no arm armor... Mereel's helmet is the standard T-visor cutomary to the Mandalorians... the buy'ce is painted red with Gold hilights around the visor...
|
|
|
|
Post by comanmereel on Nov 24, 2009 1:31:09 GMT -5
This set of armor is typically what Mereel wears most of the time...
if not specified in RP this can be the assumed armor...
Armor Quick List
Red and gold full beskar'gam
buy’ce
beskar collar
flame retardant black rubber suit
taozin belt
jet pack
shuk’om (Mandalorian Crushgaunts)
beskar Gauntlets
Verpine personal shield
personal cloaking device
This armor is a full set of Beskar'gam... just about every portion is interlinked and overlapping... More advanced in protective covering than the standard clone trooper or storm trooper... There are however some areas around joints that are not covered to allow for ease of mobility without having to be powered...
The Buy'ce is not the standard t-visor that Mandalorians usually are found wearing... There are to eye holes that Mereel can see through... these eye holes or eye slits wrap slightly around the outside curve of the helmet to increase Mereel's periphial view...
The Buy'ce is equiped and advanced sensor package, including sonar and infra red detection... which translates into an image inside the helmet giving Mereel a 360 degree view when the HUD display is activated...
The Heads Up Display or HUD, is a sophisticated program that allows Mereel to access all functions of his armor... Weapons, Jet pack, flame thrower, etc... even Slave curcuitry with both his ships have been set to a oscillating frequency married to his helmets controls...
The HUD controls are operated by specific eye movements and whisper commands... each data window displayed on the HUD is specific for Mereel's needs... ie Armor and weapons stats during combat, ship functions and staus reports, identification files with visual identification modules... exsisting bounties and galactic news reports... etc...
The Helmet is removed by unlocking it from the beskar collar and lifting it from the head... The face plate can also be lifted up and sliding it backwards to open the front of the helmet...
|
|
|
|
Post by comanmereel on Nov 24, 2009 1:32:14 GMT -5
Red and gold full beskar'gam (powered)
buy’ce
beskar collar
flame retardant black rubber suit
taozin belt
personal repulor lift system
shuk’om (Mandalorian Crushgaunts)
Verpine personal shield
personal cloaking device
this armor is painted exactly as Mereel's standard armor...
This specialized armor is powered armor. The joints are have individual servo motors adding to strength and ease of movement increasing Mereel’s dexterity and his strength…
The armor is made of overlapping plates designed to cover each part of Mereel’s body and allow free movement of the joints…
This armor has its own atmospheric and temperature control systems, keeping Mereel at a constant temperature and comfortable pressure regardless of outside conditions… this system also controls the air filtration and cleansing system that turns the outside air into breathable air inside the suit… There is a reserve air tank that is molded into to armor that allows Mereel to breath in no atmosphere where the cleansing unit cannot provide breathable air… the reserve tank holds enough air for up to 4-8 hours and can be stretched to 10 – 12 hrs using proper breathing conservation techniques…
All electronics and circuitry are EMP shielded and surge protected with automatic resets for tripped fuses… protecting the all aspects of the suits capabilities…
Another unique function of the armor is the personal repulsion lift system… small personal repulsor lifts are located in the boots and gloves… the personal repulsors in the boots are larger and stronger than the glove repulsors and are used for mainly for propulsion and able to lift Mereel off the ground where as the glove units are designed for flight maneuvering and trajectory control and not powerful enough for lift in and of themselves but used in conjunction with boot repulsors can add height and speed to Mereel’s flight… although for the purpose of flight there by replacing the jet pack, the repulsors can be used creatively outside standard flight parameters as with any other piece of equipment…
The Buy’ce HUD system is the same as with the Mereel’s standard armor, offering 360 degree viewing capabilities and multiple visual enhancements, as well as full system control with whisper and eye motion activations…
The gauntlet weapons are completely enclosed until used… the protective cover lifts exposing the weapon, be it the flamethrower or the Dur-24 wrist blaster, then closes when finished… it is design to keep the weapons clean and operable under extreme circumstances…
|
|
|
|
Post by comanmereel on Nov 24, 2009 1:33:28 GMT -5
Verpine shatter guns (2)
Taozin blood coated beskar ammunition; armor piercing style point
2 CryoBan Grenades [on belt]
3 smoke grenades [on belt]
dual phase shoto lightsaber [on belt]
beskad w/ Taozin Scabbard
flamethrower
Blastech Dur-24 wrist laser
Fiber cord whip with grappling hook
electroshock net
spring loaded retractable beskar wrist blades
Vibro knife "Ordo"
The flamethrower works on pressurized fuel that can shoot a stream of flame up to 30’… When activated gas is released from a nozzle located on Mereel’s left Gauntlet… the gas then passes an igniter which sparks causing the stream of fuel to become a stream of flame… Ignition and fuel release is controlled by the buy’ce… depending on the need, the distance of the stream can be controlled by the helmet’s control unit… this is true to both set’s of combat armor, standard and specialized…
In the standard set armor, the fuel tanks are located with the jet pack accessory… a hose connects to the nozzle and igniter incorporated into the left hand gauntlet… there is also a manual switch located on the gauntlet that will release fuel and ignite it with out the use of the buy’ce… the flame jets out in maximum distance only when used manually… this is a back up system for emergency situations when the control systems malfunction…
In the specialized armor, two small tanks run horizontally across the lower portion of the armor plating… these tanks are pressurized and design with quick release pressure valves for quick canister changes and ejections… the pressure valve attach the canisters (fuel tanks) to the fuel line that runs inside the beskar armor plating to a nozzle and igniter that is hidden under a hinged activation mechanism… this mechanism is completely enclosed and when activated the flamethrower nozzle will open at the wrist on a hinge attached to the forearm plating… the nozzle will then fire a stream of fuel through the nozzle past the ignition source and directed as Mereel aims his arm pointing at any given target… There is no manual activation of the flamethrower in this suit but there is a manual canister ejector with in reach of Mereel’s left hand…
|
|
|
|
Post by comanmereel on Nov 24, 2009 1:34:34 GMT -5
A personal energy shield was a defensive technology that projected a field of energy that protected the user from blaster fire, the elements, or other hazards. Most were small enough to be worn on a belt or arm.
When activated, the device protected the wearer with a glowing energy field. Typically, the standard energy shield was only effective against energy attacks, such as blaster bolts. However, other variants created by the Mandalorians and Echani could block melee attacks, while other shields developed by the Arkanians and Verpine, and other cultures, were capable of resisting a variety of different attacks, including electrical, kinetic, cold, heat, and sonic damage.
Direct copy from Wookieepedia
|
|
|
|
Post by comanmereel on Nov 28, 2009 17:01:34 GMT -5
Personal Basilisk War Droid payment for services rendered... Sometimes it pays to be a mercenary... Production information Creator Basiliskans Manufacturer Mandalorians Model Basilisk war droid Class Battle droid Technical specifications Length 10 meters Armament Laser cannons Pulse-wave cannons Shatter missile launchers Shockwave generating rods Brawling claws (some variations omitted the heavier weaponry in favor of performance) The pilot could secure his personal weapons to the droid   After severe damage from being next to Slayers pride eclipse when it exploded... Besii and Mereel suffered severe damage... rescued by Darth Zannah, Mereel began his recovery at her secret base... Besii also received and overhaul and repairs, with some slight modifications... and a new paint job...  |
|
(
)checking the site..realizing no one's here and leaves